Zigbee and Thread USB Stick by SONOFF:

ZBDongle-E

Add Zigbee Support and Embrace the Matter Revolution

Upgrade your Home Assistant instance with ZBDongle-E

• Pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3 out of box
• Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT and so on
• Based on EFR32MG21
• +20dBm output gain
• Aluminum housing effectively reduces signal interference from peripherals
• Optional 1.5m USB extension cable for better signal range

SONOFF ZBDongle-E is a universal Zigbee USB stick. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices, so you don't need to invest in different brands' Zigbee hubs, all you need is a universal gateway - ZBDongle-E!

The dongle plus has a wide range of supported devices, such as ZBMINI-L, SNZB01, SNZB02, SNZB03, SNZB04, S26R2ZB, S40 LITE ZB. Dongle Plus is pre-flashed with coordinator firmware; you can also flash router firmware to extend the network range.

Dongle Plus supports a variety of common systems, like Linux, Ubuntu, Raspbian, Windows, and macOS (Windows and macOS require corresponding driver installation).

Raspberry Pi (Linux) is recommended; if you use Windows or macOS, you need to install Driver first.

Note: The ZBDongle-E supports the Green Power devices, If you want to add the Hue Zigbee Green Power device, you need to switch the channel of ZBDongle-E to 11/15/20/25 at your specific application.

Windows: CH343SER

macOS: ch34xser_macos-main

Documents

• User Manual and Certification
• How to use with Thread